Saturday, November 19, 2011

Replacing Fuel Charging Assembly on Car?

If you need dis-assembly or replacement instructions for any other auto/car part, or you want to ask question related to your car/truck jeep problem then please leave the comment with your details, so I can provide you the required instructions and solutions.

The procedure is as follows :----

Fuel Charging Assembly


  1. Disconnect the negative battery cable.
  2. Relieve the fuel system pressure, as outlined earlier in this section.
  3. Detach the electrical harness connectors.
  4. Remove the vacuum hose and fuel return hose from the fuel pressure regulator.
  5. Remove the fuel line from the fuel rail.
  6. Unfasten the fuel rail retaining nuts, then remove the fuel rail.
To install:
  1. Install the fuel rail and secure with the retaining nuts.
  2. Connect the fuel line to the fuel rail.
  3. Install the vacuum hose and fuel return hose to the fuel pressure regulator.
  4. Attach the electrical harness connectors.
  5. Connect the negative battery cable.
  6. Pressurize the fuel system by turning the ignition switch to the ON position.
  7. Check for leaks, if none are found, start the engine and recheck for any leaks.

For more car related problem troubleshooting:---

This are the sections, you can go through and click the link to read its troubleshooting.


The car will not start?


Car will not crank?


Car has no spark?


How to troubleshoot car battery?


How to test starter solenoid?


How to test cars starter?

How to replace starter in car?


car will turn over but will not start?


Car wont start?


1 comment:

  1. I am grateful to you for this great content.I am reading your article and its very nice, useful & helpful for those guys who wanna know about the same.
    Fuel hose Gold Coast