Removal & Installation
The basic procedure is as follows :---
- Remove the negative battery cable.
- Detach the connector from the wiring leading to the blower motor.
- Remove the five attaching screws from the blower motor.
- To remove the blower motor, pull it downward.
- Installation is the reverse of removal.
- Disconnect the negative battery cable.
- Remove the passenger's side glove box and if equipped, the lower knee bar.
- Disconnect the blower motor electrical connector.
- Remove the mounting clamp.
- Remove the self-tapping screws securing the blower motor to the housing.
- Carefully lower the blower motor to remove it from the housing.
- Installation is in reverse order of removal.
- Before servicing the vehicle, refer to the Precautions Section.
- Remove the screws and disengage the clips securing the passenger-s side lower footwell panel, then remove the panel.
- Remove the screws securing the blower motor assembly.
- Lower the assembly, then detach the electrical connection.
- Installation is the reverse of removal.
-------------------
For more car related problem troubleshooting:---
This are the sections, you can go through and click the link to read its troubleshooting.
---------
The car will not start?
-----------------
Car will not crank?
-----------
Car has no spark?
-------------
How to troubleshoot car battery?
-----------------
How to test starter solenoid?
http://schematicsdiagram.blogspot.com/2011/06/how-to-test-starter-solenoid.html
--------------------
How to test cars starter?
http://schematicsdiagram.blogspot.com/2011/06/how-to-test-cars-starter.html
How to replace starter in car?
-----------
car will turn over but will not start?
-----------------
Car wont start?
----------
No comments:
Post a Comment